ENDURANCE UPS

Factory Automation

SCADA Systems

Precision Instrument

Servers

Cash Registers

Security

Graphic Touch Screen

Isolation Transformer

Maintenance Bypass Switch

High Performance

Full galvanic isolation for safer operation and stronger load adaptability
Suitable to recharge standard and external battery packs for back-up times up to several hours.

High input performance with wide input voltage range, PF=1 and low harmonic distortion

Complete solution with built-in static and manual bypass switch

Rugged design suitable for harsh operating environments

Comprehensive and visualized LCD display, rich information including working status and operating data

Flexible Design

Output voltage is selectable via LCD
Batteries total quantity settable, 16 to 20x12V blocks
SNMP or RS485+dry contact
Charging voltage temperature compensation
Parallel function

Endurance 6-10kVA

MODEL	EN6-11	EN10-11
INPUT
Voltage (Vac)	80~275
Frequency (Hz)	50/60± 10% (50/60Hz auto-sensing)
Power Factor	≥0.99
THDi	<5%
Phase	3W (L+N+G/L1+L2+G)
OUTPUT
Capacity (kVA)	6	10
Power Factor	0.9
Voltage (Vac)	120/208/220/230/240±1% (settable on display panel and output wiring line)
Frequency (Hz)	50/60±0.2% (battery mode)
THDv	THD<1% (linear load), THD<5% (nonlinear load)
Transfer Time (ms)	0
Efficiency	Up to 95%
Crest Factor	3:1
Overload	125% for 10mins
BATTERY
Battery Voltage (Vdc)	192 (192~240V settable)
Battery Type	16×7Ah12V/External	16×9Ah12V/External
Charging Current (A)	1A (default); 1~8A settable
OTHER
Communication Interface	RS232, EPO (SNMP, USB, RS485+dry contact
LCD Display	AC input & output voltage, frequency, Load level, Battery level, Temperature.
	AC mode, Battery mode, Bypass mode, and Fault
Alarm	Low battery, abnormal AC input, UPS failure
Protection	Low battery, overload, short-circuit and over temperature, etc.
Noise (dB	45	50
Working Temperature (℃)	-5~40
Relative Humidity	0~95%, No condensation
Dimension (W×D×H) (mm)	250×660×720
Weight (Kg)	104/68	128/88